How To Replace A 1994 Chevy Truck Ignition Switch

This page has free videos, resources, e-books and more dedicated to Ignition Switch and How To Replace A 1994 Chevy Truck Ignition Switch!


Posted on

Mute the speaker Listen to this using a male or female voice M/F 

By Russell Wood

The ignition switch secured to the steering column on a 1994 Chevrolet truck begins process of starting the engine. When the key is turned, the ignition sends an electrical signal, triggering the starter, which in turn causes the engine to turn over, providing power. If the ignition switch goes out, the starting process can't begin and you won't be able to drive the truck. To fix the issue, you have to replace the truck's ignition switch, which should take about an hour.

Mute the speaker Listen to this using a male or female voice M/F Tilt the steering column down. Remove the steering column cover from the steering column, using the Phillips-head screwdriver. Unscrew the washer-head screw and hexagon nut from the switch with the 1/4-inch ratchet and socket.

Mute the speaker Listen to this using a male or female voice M/F Pull out the dimmer switch from the rod on the steering column, then disconnect the ignition switch from the actuator rod. Unplug the switch's wiring from the column with your hands, then remove the switch.

Mute the speaker Listen to this using a male or female voice M/F Make sure the replacement switch is in the "off-lock" position. Install the switch into the column and attach the actuator rod with your hands. Plug in the wiring to the switch. Reconnect the dimmer switch to the rod.

Mute the speaker Listen to this using a male or female voice M/F Reinstall the washer-head screw and nut, using the 1/4-inch ratchet and socket. Reinstall the steering column cover with the Phillips-head screwdriver.

Share on Facebook Share on Twitter Email Gmail Yahoo! More...



Our Most Popular Article




More Ignition Switch Information

 Switches
FREE E-Book
 Ignition Switches
FREE E-Book
x