How To Program An Ignition Switch

This page has free videos, resources, e-books and more dedicated to Ignition Switch and How To Program An Ignition Switch!


Posted on

Mute the speaker Listen to this using a male or female voice M/F 

By Matthew Fortuna

Ignition switches can now be programmed to electronic ignition keys to add extra security and safety to your vehicle. These keys are synced with your engine to start your car, and once you program them, only a programmed key will start your car. Both safe and convenient, you can program the key to the switch in just a few minutes from your car's driver's seat.

Mute the speaker Listen to this using a male or female voice M/F Enter your car with your cut ignition key and insert the key into the ignition switch.

Mute the speaker Listen to this using a male or female voice M/F Turn the key to the "On" position and leave it in that position for 10 minutes and 30 seconds.

Mute the speaker Listen to this using a male or female voice M/F Turn the car back to the "Off" position within 45 seconds of the 10:30 elapsing.

Mute the speaker Listen to this using a male or female voice M/F Repeat the previous two steps two more times, for a total of three cycles. End the third cycle in the "Off" position.

Mute the speaker Listen to this using a male or female voice M/F Turn the key back to the "On" position to end the programming sequence.

Mute the speaker Listen to this using a male or female voice M/F These steps are used for U.S. manufactured vehicles and only work on vehicles with a VIN number starting with 1 or 4.

Share on Facebook Share on Twitter Email Gmail Yahoo! More...



Our Most Popular Article




More Ignition Switch Information

 Ignition Switches
FREE E-Book
 Switches
FREE E-Book
x